FP BLACK Turbocharger for the Mitsubishi Evolution IX
Product Description
The FP BLACK&trade for the Mitsubishi Lancer Evolution 4-9 is the most fully evolved stock appearing variant we offer. It features an 82mm HTA&trade compressor wheel with a flow rate of 68lb/min with our 84mm Flow Advancement Port&trade compressor cover. The turbine side features a large 67mm turbine wheel.
The turbo comes standard with a 25psi wastegate actuator and our Evo Oil Filter Housing Line Kit. You may select a lower pressure actuator if needed, but the unit is intended to operate above 25psi of boost pressure. This turbocharger will produce 500-600whp results readily on well prepared engines.
This turbo features a 12 month warranty. You must activate this warranty within 30 days of purchasing this turbocharger by returning the warranty card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, disassembly of the turbocharger will void the warranty.
Porting is recommended for this turbocharger, as such we have highlighted the option, if you would not like porting please select "No" in the porting options box.
The turbo comes standard with a 25psi wastegate actuator and our Evo Oil Filter Housing Line Kit. You may select a lower pressure actuator if needed, but the unit is intended to operate above 25psi of boost pressure. This turbocharger will produce 500-600whp results readily on well prepared engines.
This turbo features a 12 month warranty. You must activate this warranty within 30 days of purchasing this turbocharger by returning the warranty card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, disassembly of the turbocharger will void the warranty.
Porting is recommended for this turbocharger, as such we have highlighted the option, if you would not like porting please select "No" in the porting options box.
